![background image](http://html1.mh-extra.com/html/xerox/phaser-790dp/phaser-790dp_getting-started-manual_3912476082.webp)
3. Network Setup
Macintosh OS print drivers
3-12
Xerox Phaser 790 Getting Started
Setting up the Phaser 790 in the Chooser
1.
Select
Chooser
from the Apple menu.
2.
Ensure that AppleTalk is set to
Active
.
3.
If necessary, select the
AppleTalk Zone
that contains your printer.
4.
Select the
AdobePS
icon.
The printer is displayed in the Select a PostScript Printer list in the form
of <server name>_<device name>_<print connection>. The device
name is the internal name of your printer.
5.
Perform one of the following steps:
•
If Desktop printing is on, select a printer connection from the
Select
a PostScript printer
list and select
Create
. A printer icon is
created and displayed on the desktop.
•
If Desktop printing is not on, select the
Setup
button.
The Adobe PS printer driver automatically selects the correct PPD
file for your Phaser 790.
6.
Perform one of the following:
•
If Desktop printing is on, select the
printer icon
that is displayed on
the desktop or select the
printer
in the Chooser list. Select the
Setup
button
•
If Desktop printing is not on, an icon is displayed next to the newly
installed printer in the Chooser list. Select the
printer icon
and
select the
Setup
button.
7.
To configure the printer, double-click the
printer
from the PostScript
Printer list. Select the
Configure
button and select available
options
.
Select
OK
twice.
8.
Close the
Chooser
.
For detailed information about installing Fiery software and fonts; configuring
connections for ColorWise ProTools, Fiery Spooler or Fiery Link; or installing
fonts or additional software, refer to the
Installing user software in a
Macintosh OS environment
chapter.