3. Network Setup
Windows 95/98 print drivers
3-6
Xerox Phaser 790 Getting Started
7.
Perform one of the following:
•
If you are installing from the CD, browse to one of the following
folders:
•
For PostScript printing:
English\Prntdrvr\PS_drvr\Win_9x
•
For PCL printing:
English\Prntdrvr\PCL_drvr\Win_9x
•
If you are installing from files you downloaded using the Installer
WebTool, browse to one of the following folders
•
For PostScript printing:
Prntdrvr\PS_drvr\Win_9x
•
For PCL printing:
Prntdrvr\PCL_drvr\Win_9x
Select
OK
and ensure that the
oemsetup.inf
or
oemsetup
option
is selected.
8.
Ensure that the path is correct and select
OK
.
9.
In the Printers box, select
Xerox Phaser 790
and
Next
.
10. Select
LPT1: ECP Printer Port
and
Next
.
11. Using a maximum of 31 characters, enter a name for the printer or leave
the default name in the Printer name box.
12. If you want the Phaser 790 to be the default printer, select
Yes
; if not,
select
No
. Select
Next
.
13. Select
No
in the next dialog box to postpone printing a test page
14. Select
Finish
.
When the installation is complete, the necessary files are installed to your
hard disk. Configure the options on your printer and complete the appropriate
network connection.
For detailed information about setting up parallel port printing, IPX/SPX
printing, SMB printing or setting printer options and installing additional
software, refer to the
Installing the user software in a Windows 95/98
environment
chapter.
