![background image](http://html1.mh-extra.com/html/xerox/phaser-790dp/phaser-790dp_getting-started-manual_3912476015.webp)
Setting up the Printer Cabinet
1. Setting up the Phaser 790
Xerox Phaser 790 Getting Started
1-5
Setting up the Printer Cabinet (optional)
If you ordered the Printer Cabinet, perform the following steps. If you did not
order the Printer Cabinet, go to the
Installing the 2 Tray Module
procedure.
You will need a phillips screwdriver in order to perform this procedure.
1.
Open the carton containing the Printer Cabinet and ensure that you have
received the following items:
•
Bottom panel with four casters
•
Top panel containing many holes
•
Rear (small) panel
•
Left side panel with hinge attachments on inside front edge
•
Right side Panel without hinge attachments
•
Two hinges
•
Four wood screws
•
12 large screws
•
Two locating pins
•
One u-shaped locking bracket
2.
Locate the bottom panel and lock the four casters.
0301242A -W O L