![background image](http://html1.mh-extra.com/html/xerox/phaser-790dp/phaser-790dp_getting-started-manual_3912476013.webp)
Preparing for the installation
1. Setting up the Phaser 790
Xerox Phaser 790 Getting Started
1-3
Checking the installation components
Ensure that each of the components you ordered are available
before
you
begin the installation. All of the componets are listed below.
•
Printer
•
Printer Cabinet (optional)
•
Duplex Tray (optional)
•
2 Tray Module (optional)
You will need a phillips head and a flat blade screwdriver in order to perform
the installation of the Phaser 790.
Following the instructions ensures that the Phaser 790 componets are
installed in the following order:
1.
Printer Cabinet, if ordered
2.
2 Tray Module, if ordered
3.
Printer
4.
Duplex Tray, if ordered
5.
Accessories, if ordered
6.
Client Software (customer installed)
The first step
Perform one of the procedures listed below:
•
If the Phaser 790 was installed for you, go to
Chapter 2. Getting to know
the Xerox Phaser 790
.
•
If you ordered the optional Printer Cabinet, go to the
Setting up the
Printer Cabinet
procedure.
•
If you ordered the optional 2 Tray Module, go to the
Installing the 2 Tray
Module
procedure.
•
If you do not have a 2 Tray Module, go to the
Upacking the Printer
procedure.