3. Network Setup
Windows NT 4.0 print drivers
3-10
Xerox Phaser 790 Getting Started
8.
Perform one of the following:
•
If you are installing from the CD, browse to one of the following
folders:
•
For PostScript printing:
English\Prntdrvr\PS_drvr\Win_NT4.x
folder
•
For PCL printing:
English\Prntdrvr\PCL_drvr\Win_NT4.x
folder
•
If you are installing from files that you downloaded using the
Installer WebTool, browse to the
Prntdrvr
folder.
Select
OK
and ensure that
oemsetup.inf
or
oemsetup
is selected.
9.
Ensure that the path is correct and select
OK
.
10. In the Printers box, select
Xerox Phaser 790
and
Next
.
11. Using a maximum of 31 characters, enter a name for the Printer or leave
the default name in the Printer Name box.
12. If you want the Phaser 790 to be the default printer, select
Yes
; if not,
select
No
. Select
Next
.
13. Indicate whether you want the printer installed as a shared printer.
a.
If you select Shared, enter a Share Name for the printer. or leave
the printer default name.
b.
Make selections from the list of operating systems used by client
workstations.
c.
Select
Next
.
14. Select
Yes
in the next dialog box to postpone printing a test page and
select
Finish
.
When the installation is complete, the Printers window is displayed with an
icon for the newly installed printer. When you select Print, your files are
transmitted over the parallel port connection to the Printer.
For detailed information about setting up parallel port printing, IPX, TCP/IP,
SMB printing or setting printer options and installing additional software, refer
to the
Installing the user software in a Windows NT 4.0 environment
chapter.
