Safety Notes, Compliances, Certifications, and other notices
Xerox Phaser 790 Getting Started
iv
Never
push objects of any kind into the slots in the covers, as they may touch
dangerous voltage points or short out parts that could result in a risk of fire or
electric shock.
The
Phaser 790 is designed to prevent user access to unsafe areas and to
ensure that the device will not operate with the covers opened. Never attempt
any maintenance function that is not specified in the Xerox Phaser 790 User
Information.
Never
remove any covers or guards that require a tool for removal, unless
you are instructed to do so. Ensure that you read all Warnings and Cautions,
and follow each step in the instructions exactly as they are written.
Never
attempt any activity that is not specified in the Xerox Phaser 790 User
Information, or on the User Interface, or that is not specifically directed by an
authorized Xerox Representative.
Do not
look directly at the exposure lamps. The exposure lamps are not
harmful but they are very bright and may cause discomfort. It is
recommended that the Document Handler be closed when the Phaser 790 is
in use.
Never
operate the Phaser 790 if unusual noises or odors are detected.
Disconnect the power cord from the wall outlet and call Xerox Service to
correct any problems.
Maintenance Safety
Refer to these instructions as needed in order to ensure the safe operation
of the Printer Copier.
Always
use materials that are supplied or approved by Xerox. Use of other
materials may result in poor performance and could create a hazardous
situation.
Do not
use aerosol cleaners. Follow the instructions in the Xerox Phaser 790
User Information for the appropriate cleaning methods.
Never
use supplies or cleaning materials for purposes other than what they
were intended. Keep all supplies and cleaning materials out of the reach of
children.
Never
place coffee or other liquids on the copier.
Never
spill liquid of any kind on the copier.
The
Phaser 790 is equipped with an energy-saving device to conserve power
when the machine is not in use.
