Advanced Features and Troubleshooting Manual
87
Control Panel Messages
Control Panel Messages
When the printer’s control panel displays a message
,
find the message in the following
table listed in alphabetical order. If there is a problem, perform the corrective action for
resolving the problem. If the problem persists, check the Xerox troubleshooting knowledge
database on the web at:
www.xerox.com/officeprinting/infoSMART/
or contact your
Customer Support Center.
Error
Description and corrective action
All Jobs
Delete
Appears when using the secure print feature.
Press the
Enter
key (labeled
4
) to delete all secure jobs in your queue.
Press the
Value
keys (labeled
3
or
7
) to toggle between
Delete
and
.
All Jobs
Appears when using the secure print feature.
Press the
Enter
key (labeled
4
) to print all secure jobs in your queue.
Press the
Value
keys (labeled
3
or
7
) to toggle between
Delete
and
.
Canceling Job...
<Job Name>
Tells you that a job is being cancelled.
Clear Paper Path
Appears following an initial paper jam message.
Remove any jammed paper from the exposed paper path, close the covers
and trays, then refer back to the control panel for further messages.
Close Covers
The top or rear cover is open.
Close the open cover to resume printing.
Close Stacker Door
The Stacker Bin’s rear door is open.
Close the door to resume printing.
Close Tray 2 Rear
Door
The printer cannot feed from the 2,000-Sheet Feeder when installed as Tray
2, because the rear tray is open.
Close the door to resume printing.
Close Tray 3 Rear
Door
The printer cannot feed from the 2,000-Sheet Feeder when installed as Tray
3, because the rear tray is open.
Close the door to resume printing.
Delete All Jobs
Appears when using the Reset Menu to delete secure and proof jobs from the
hard disk.
Press the
Value
keys (labeled
3
or
7
) to toggle between
Yes
and
No
.
Select
Yes
and press the
Enter
key (labeled
4
) to delete the jobs.
Select
No
and press the
Enter
key to exit without deleting the jobs.
Delete All Jobs
Disk Locked
Deleting all jobs from the disk has failed, because the disk was locked via a
PJL or SNMP command or through CentreWare Internet Services. It will be
necessary to unlock the disk before deleting all jobs.
Deleting...
<Job Name>
Tells you that the secure and proof jobs you asked to delete (in the previous
message) are being deleted.
Summary of Contents for PHASER 5400
