Xerox PHASER 5400, Advanced Features And Troubleshooting Manual

Page: 38 / 127

22 Xerox Phaser 5400 Laser Printer
Control Panel Menus
AppSocket PDL Sets the default Print Description Language emulation for the Ethernet
AppSocket interface.
Values:
Auto
(default)
PCL
PostScript
AppSocket Bin PS Sets the AppSocket binary mode of PostScript.
Values:
On
Off
(default)
ETalk Enable Sets the Applet EtherTalk protocol.
Values:
On
(default)
Off
HTTP Enable Sets the Hypertext Transport protocol.
Values:
On
(default)
Off
Auto IP Address Enables/disables the generation of an IP address by the printer if the DHCP
server does not respond with an IP address.
Values:
On
(default)
Off
IP Address Res Sets the method used to resolve (assign) the IP address, including Subnet
Mask and Default Gateway.
Values:
Static
BOOTP/RARP
DHCP
(default)
IP Address Sets the four byte IP address. (This menu item only appears if
IP Address
Res
is set to
static
.)
Values:
xxx.xxx.xxx.xxx
where
xxx
=
000
to
255
Note: Once the control panel shows
IP Address
on the top line, use the
Value keys (labeled 3 or 7 ) to scroll to the desired value at the cursor
location. To move the cursor, use the Item keys (labeled 2 or 6 ). Thus, you
can change characters within the address rather than having to re-enter the
entire address.
Ethernet Menu Items (cont'd.)