![background image](http://html2.mh-extra.com/html/xerox/nuvera-100/nuvera-100_installation-planning-manual_3382809071.webp)
Installation Planning Guide
6- 23
Printer requirements and specifications
The following table lists the turning requirements for the feeder/
stacker module.
Table 6-10 Turning radius for feeder/stacker module
NOTE: These turning figures are based on inverter/feeder/stacker
dimensions of 28 inches / 71.1 cm by 32.25 inches / 81.9 cm.
Printer hardware specifications and requirements summary
The following table summarizes the specifications and electrical
requirements of your printer hardware components.
Passage or doorway 1 width
Minimum passage 2 width
29 inches / 73.7 cm
33 inches / 83.8 cm
30 inches / 76.2 cm
32 inches / 81.3 cm
31 inches / 78.7 cm
31 inches / 78.7 cm
32 inches / 81.3 cm
30 inches / 76.2 cm
33 inches / 83.8 cm
29 inches / 73.7 cm
Summary of Contents for Nuvera 100
