![background image](http://html2.mh-extra.com/html/xerox/nuvera-100/nuvera-100_installation-planning-manual_3382809035.webp)
Installation Planning Guide
3-1
3
Printer components and
options
The printer processes the page images received from the
controller and produces the printed output. This chapter describes
the components and options available for the Xerox DocuPrint
100/115/135/155/180 EPS printer.
Printer components
The standard printer components are the sample tray, the purge
tray, the two processor feeder trays, and the feeder/stacker
module or modules.
The base configuration for the printer includes an inverter feeder/
stacker and one additional feeder/stacker module.
Figure 3-1
Printer base components
1. Processor feeder trays
2. Sample tray
3. Attention light
4. Purge tray
5. Feeder/stacker module
6. Inverter feeder/stacker module
NOTE: Some printer configurations may include a control
console (not shown).
The printer provides control buttons and displays for basic printer
functions and status information. Where available, the printer
control console displays messages and graphics that assist you
with jam clearance and printer maintenance. Labels are located
Summary of Contents for Nuvera 100
