![background image](http://html2.mh-extra.com/html/xerox/nuvera-100/nuvera-100_installation-planning-manual_3382809059.webp)
Installation Planning Guide
6- 11
Printer requirements and specifications
Service access
The following figure provides space planning information and
service access requirements for the bypass transport.
Figure 6-7
Bypass transport space planning diagram (top view)
1. Recommended third-party feeder hardware attaches at rear
of printer
2. Expected third-party input paper feed path
3. Neutral area, to remain unoccupied
4. Shaded areas at rear and right side of the bypass transport
require third-party input/output devices to be undockable
from the feeder/stacker or the bypass transport
5. Register edge of the output sheet
6. Third-party hardware must not extend more than 1 inch /
25 mm beyond bypass transport front cover line for correct
front door access
7. Bypass transport / input enablement jam clearance space is
required
Bypass transport
paper path
The following figure shows the paper path through the bypass
transport from a front view.
Summary of Contents for Nuvera 100
