A-6
DocuPrint 900/1300 User’s Guide
Job Setup and Initialization Files
A
Profile Keyword Options
The following tables describe the keywords for each of the profile types.
Default values for the keywords are underlined in the table.
Generic Profile
Keywords
These keywords may be used in any profile type, whether it be an Xerox job
profile or a AFP job profile.
Generic Keyword
Function
Options or Default Value
ALIGNXBACK
Moves printed output along the portrait X-
axis, in 1/14,400-inch increments, on the
back of the page.
Not used by the DocuPrint 900/1300.
ALIGNXFRONT
Moves printed output along the portrait X-
axis, in 1/14,400-inch increments, on the
front of the page.
Not used by the DocuPrint 900/1300.
ALIGNYBACK
Moves printed output along the portrait Y-
axis, in 1/14,400-inch increments, on the
back of the page.
Not used by the DocuPrint 900/1300.
ALIGNYFRONT
Moves printed output along the portrait Y-
axis, in 1/14,400-inch increments, on the
front of the page.
Not used by the DocuPrint 900/1300.
COMMENT
(for tape input)
Passes a Tape Mount message through
to the separator pages.The message
must be enclosed in quotation marks.
Blank or ASCII text string up to 20
bytes. Example:
“Mount Tape : TELEPHONE DATA’
COPIES
Specifies how many copies to be printed. A valid number
DATASOURCE
Defines the name of data file to process.
This could be a file name or a client
name.
SCSI for tape.
file name (
up to 256
bytes with or without path and
extension) for disk.
DATATYPE
Defines the source of the print data.
TCPIP, DISK or TAPE
DEFAULTNATIVEFONT
Defines the name of the coded font
resource to be used as the job default
font.
NONE or a valid font resource name
up to 8 characters
Example: X0GT12
DEFAULTVIRTUALFONT
Defines the default virtual font to be used.
This is a required keyword.
Name of a valid font resource up to 8
character.
DELETEINPUT
Specifies whether the Executive is to
delete the input file for a disk job when the
job is finished. This option is generated
automatically by VIPConnect.
YES or NO
DELVDDAFTERJOB
Defines whether to suppress deletion of
all VDDs until after a job has finished
processing.
YES, to delete all the VDDs after the
job has completed, or
NO, to delete VDDs each time it
reaches a checkpoint.
FORM
Specifies the pre-printed forms required.
A name.
HARDWAREORIGIN
Defines whether to rotate the pages when
printing.
0, 90, 180, or 270
Job Setup Files
DocuPrint 900/1300 User’s Guide
A-7
HOLDJOB
Specifies whether or not the job is to be
submitted on hold.
YES or NO
HOLDVDD
Specifies whether or not to save the VDD
file after processing.
YES or NO
HOSTFORM
Specifies the host form name that
appears on banner pages.
HOLDOUTPUT
Specifies whether output processing is to
be held.
YES or NO
INPUT
Defines the name of the input group or
single client to do the input processing.
Value entered must be coordinated with
the value of the TYPE keyword.
AFP2VDD or XRX2VDD
INPUTENDPAGE
Defines the page number of the last page
to be processed into VDD format by the
input filter.
END (process through to end of data)
or 1 to 999999999
INPUTENDSIDE
Defines the number of the last side to be
processed into VDD format by the input
filter.
END (process through to end of
data), LAST, or 1 to 999999999
INPUTSTARTPAGE
Defines the page number of the first page
to be processed into VDD format by the
input filter.
1 - 999999999
INPUTSTARTSIDE
Defines the number of the first side to be
processed into VDD format by the input
filter.
1 - 999999999
IOSEPARATION
Specifies how many sides (upper limit)
the input can get ahead of output before
input processing is paused and at how
many sides that input will resume
(resume limit).
None or a valid upper limit and
resume limit.
Example: 10000, 7000
JOBSET
Defines the Job Set be used.
NONE or a fully qualified Setup file
name up to 256 bytes.
MAXOUTSIDESPERMIN
Sets the maximum output rate in sides
per minutes. Value should be 10-50%
over the rated speed of the printer.
0 - 9999 or MAXIMUM
(0 indicates as fast as possible.)
MAXSIDESPERMIN
Sets the maximum input rate in sides per
minutes. Value should be 10-50% over
the rated speed of the printer.
0 - 9999 or MAXIMUM
(0 indicates as fast as possible.)
NATIVERESOURCETYPE
Defines the native resource type to be
used. This is only used by sample utilities.
AFP240, AFP300, or XRX300
OUTPUT
Defines the name of the output group or
single client to do the output processing.
If the Profile contains a DATASINK value,
the output will be processed to a tape.
VDD21300, or NONE
OUTPUTENDPAGE
Defines the page number of the last page
to be printed by the output driver.
END (print through to end of data) or
1 to 999999999
Generic Keyword
Function
Options or Default Value
