Xerox DocuPrint 180, Configuration Manual

Page: 229 / 276

XEROX DOCUPRINT NPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM 10-1
10. 10 Managing fonts
You can install fonts on the Printer Controller from a CD-ROM or a
floppy diskette, and you can delete installed PostScript and PCL
fonts from the Printer Controller.
You can list the fonts on a CD-ROM or floppy diskette (for example,
before you install them). You can also list the fonts on the Printer
Controller. You can print any of these lists of fonts, and you can print
samples of the fonts installed on the Printer Controller.
You can terminate the commands for installing and listing fonts by
pressing the Control-C or DEL keys.
Note: For more information about fonts, refer to the Xerox
DocuPrint Network Printer Series Guide to Using PDL . For
information regarding MICR fonts, see the Generic MICR
Fundamentals Guide.
Installing fonts
Before you install fonts, enter the Stop Printing command and then
enter the List Documents command to ensure that there are no jobs
being processed. Use the following commands to install fonts, as
appropriate:
•
Install Fonts from CDROM
•
Install Fonts from Floppy
•
Install PCL Fonts from Floppy
After you install the fonts, enter the Restart Sequencer and Start
Printing commands.
Install Fonts from CDROM
Use the Install Fonts from CDROM command to install PostScript
fonts on the Printer Controller from a CD-ROM.
Note: To ensure that Type 0 fonts install properly on your
DocuPrint NPS, the CD-ROM containing the fonts you wish to install
must either be purchased from Xerox, or must conform to a
specification available from Xerox.
Access level Administrator
Syntax Install Fonts From CDROM <pattern>
Argument <pattern>