Xerox DocuPrint 180, Configuration Manual

Page: 70 / 276

USING UTILITY COMMANDS
2-12 XEROX DOCUPRINT NPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM
Changeable parameters
The Configure utility enables you to change the parameters shown in
the table below. Refer to the table when changing individual
parameters (Option 5).
•
The column titled “Best option” shows the best option to use in
configuring that parameter.
•
All parameters can be changed using Option 5. If “5” is shown
as the best option, it is the only option for changing that
particular parameter.
•
Parameters in boldface type must be set to “Y” to enable that
package. The TCP/IP package is always enabled.
Table 2-3. Changeable parameters using Configure
Package Parameter
Best
Option
Purpose of Parameter
Appletalk appletalk.enable 3 Enables receipt of jobs via AppleTalk PAP
appletalk.forcePS 3 Jobs received via AppleTalk will always be
interpreted as PS
appletalk.netdevice 3 Specifies device on which to run AppleTalk
appletalk.phase 3 Phase of the AppleTalk Network
appletalk.zone 3 Zone name of the (phase 2) AppleTalk Network
“driver”
package driver.iotboard 4 XEPI or DCIM—refers to the type of S-bus
interface board installed in the DocuPrint
controller for interfacing with the printer
jpm jpm.accounting.format 5 Specifies the format version used for the
docuprint_accounting log; can be “2” or “3”.
jpm.purge 3 Enables automatic Dump Accounting
jpm.purge.delay 3 # of days to retain information in jpm database
jpm.purge.save 3 Saves attribute data purged from jpm into a log
file
jtprescan jtprescan.enable 3 Enables Xerox Job Ticket Processing
(necessary for Xerox print client, MS Windows
client, Windows DocuPrint driver)
lpd lpd.enable 3 Enables receipt of jobs sent via lpr command
lpd.nonstandard-
timeout 3 Enables use of lpd timeout other than default of
60 seconds
lpd.nonstandard-
timeout.value 3 Alternate timeout value in seconds
maint maint.savecore 3 Automatically compresses and saves any core
files for debugging purposes
maint.savecore.maxco
re 3 Maximum disk space in MB occupied by saved
core files
maint.savecrash 3 Saves the system state at the time of a system
crash. Crash dumps are saved in /var/crash.