Xerox DocuPrint 180, Configuration Manual

Page: 264 / 276

HANDLING XDOD/DIGIPATH JOBS
13-4 XEROX DOCUPRINT NPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM
•
If you are running SunOS 4.1.x, verify that the Beame &
Whiteside NFS daemon (bwnfsd) is running for XDOD
installations prior to 4.0. To do so, obtain a command tool from
the background menu and type:
ps -axc | grep bwnfsd | grep -v grep .
– If the bwnfsd is running, a line describing the daemon is
displayed.
– If the bwnfsd is not running, restart DocuPrint, then try the
verification again. If the daemon is still not running, contact
your service representative.
Removing .gfi directories
If a job submitted from an XDOD client was canceled or aborted, the
partially complete .gfi directory is not automatically deleted from the
/var/spool/data/xdms directory. To remove unwanted .gfi directories:
1. In the DocuPrint Print Service window, at the PS> prompt, enter
privilege administrator .
2. Enter stop all to stop printing and queueing.
3. Obtain a command tool from the background menu.
Note: Using Wizard Mode to delete unwanted .gfi directories is
not recommended.
4. Enter cd /var/spool/data/xdms .
5. Enter pwd to verify you are in the /var/spool/data/xdms
directory.
6. Use the su command to access root.
7. Enter the superuser password.
8. Enter ls -lt to display a list of subdirectories sorted by date.
9. Enter rm -r <name>.gfi to remove each .gfi directory with a
date earlier than the current date.
10. Enter exit to exit superuser mode.
11. Select quit to close the command tool window.