Xerox DocuPrint 180, Configuration Manual

Page: 72 / 276

USING UTILITY COMMANDS
2-14 XEROX DOCUPRINT NPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM
Options
The Configure utility provides the following options.
Printing Configuration Reports: Options 1 and 2
Options 1 and 2 print two different types of configuration reports:
•
Option 1: Prints a report of the routine installation questions,
with the answers given.
•
Option 2: Prints a report of all the configuration parameters
with their names and values.
The parameters are grouped by package (a package is a named
piece of the DocuPrint software). The parameters at the end of the
list are in a special category called System Parameters. These are
parameters of the entire system, such as the IOT type. Each
parameter in this report has a name (such as FontDisk or tcpip.ftp)
that you use if you want to change the value with Option 5. Each
xclient xclient.enable 3 Enables use of the DocuPrint print client
xipp xipp.enable 3 Enables special XIPP prescan filter for use with
Xerox Documents on Demand (XDOD)
system ACOPaper 5 ACO market region can use either US or metric
sized paper
FontDisk 4 Places /imagerfonts on this disk number
FormsDisk 4 Places /var/db/forms and the VIPP (XGF)
customer-installed files in /usr/xgf on this disk
number
HostName 4 TCP/IP hostname
IOT 4 4050, 4090, 4850, 4890, DP96, 4635, 4180,
92C (Changing this parameter is not
supported.)
IPAddress 4 IP Address of DocuPrint server
MarketRegion 4 USCO, XCI, RX, or ACO
NetDevice 4 Ethernet=le0, le1, le2; Token Ring=tr0, tr1, tr2;
100MB Ethernet=hme0, hme1, hme2; Fiber
Optic FDDI=nf0, nf1, nf2
Netmask 3 TCP/IP netmask
PrinterName 4 Default PrinterName
ReservePagesDisk 4 Places /var/db/reserve_pages on this disk
number
SpoolDisk 4 Places /var/spool on this disk number
TimeZone 4 Timezone from /usr/share/lib/zoneinfo
Table 2-3. Changeable parameters using Configure
Package Parameter
Best
Option
Purpose of Parameter