Xerox DocuPrint 180, Configuration Manual

Page: 188 / 276

CHECKING SYSTEM STATUS AND DISPLAYING BILLING METERS
8-2 XEROX DOCUPRINT NPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM
Example This example shows the information provided with the List Volumes
command:
Show Status
Use the Show Status command to show the status of the printer.
Note: If multiple problems occur at the printer, the Show Status
command shows only the most recent system problem. You may
need to check other parts of the system after correcting the problem
displayed.
The user privilege mode shows less status information than the
operator mode.
Access level Administrator, operator, or user
Syntax Show Status
Arguments None
Example The following example shows the information provided by the Show
Status command. There are differences in the information provided
based on the printer model and configuration.
PS-op>
list volumes
Filesystem kbytes used avail capacity Mounted on
/dev/dsk/c0t0d0s0 16231 12621 1990 87% /
/dev/dsk/c0t0d0s6 135415 108626 3249 90% /usr
/dev/dsk/c0t0d0s7 3547492 469542 2723210 15% /var
/dev/dsk/c0t0d0s5 114847 80328 23039 78% /opt