Xerox DocuPrint 180, Configuration Manual

Page: 125 / 276

SETTING SYSTEM DEFAULTS
XEROX DOCUPRINT NPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM 5-21
Restore Default Imager Parameters
Use the Restore Default Imager Parameters command to restore the
default values of the imager parameters.
Access level Administrator
Syntax Restore Default Imager Parameters
Arguments None
Example This example restores the default values of the imager parameters:
Note: Default values are:
Setting PCL imager parameters
PCL Imager Parameter commands adjust the imaging level of PCL
print jobs only. They control the rendering of lines, fonts, tints, and
fine features.
•
The Show PCL Imager Parameters command displays the
current values of the imager parameters.
•
The Change PCL Imager Parameters command changes the
current values of the imager parameters for PCL only.
•
The Restore Default PCL Imager Parameters command resets
the imager parameters to the default values.
You must enter the Restart Sequencer command after you change
or restore default PCL imager parameters for the values to take
effect.
PS-admin>
restore default imager parameters
Do you want to restore default parameters?
yes
LineThicken:
FontThicken:
Tint:
SampledBlackSnap:
FatScanConversion: 0.3
0.0
1.0
0.0001
FALSE