Xerox DocuColor 2045, Operator'S Manual

Page: 257 / 340

H
I G H
C
A P A C I T Y
S
T A CK E R
S
T A P L E R
( H C S S ) A
C C E S S O R I E S
D O C U C O L O R
2 0 6 0 / 2 0 4 5
O P E R A T O R M A N U A L
AC
CESSO
RIES
5–45
Stapling from the Fiery EX2000
Note : ppm = pages per minute.
Plain Paper 3 Hole Drilled Paper Sample Output
Simplex LEF @ 60 ppm
1. Load any Tray with LEF plain paper.
2. Select
Front/Dual staple position.
3. Select HCSS Stack Tray as the output
destination.
Duplex LEF @ 30 ppm
1. Load any Tray with LEF plain paper.
2. Select
Head to Head orientation.
3. Select Front/Dual staple position.
4. Select HCSS Stack Tray as the output
destination.
Simplex LEF @ 60 ppm
1. Load Trays 1, 2, or 3 LEF with 3 hole drilled paper
( holes to the left in Trays 1 and 2, holes to the
right in Tray 3 .)
2. Select Front/Dual staple position.
3. Select HCSS Stack Tray as the output destination.
Duplex SEF @ 22.5 ppm
1. Load Trays 1, 2, or 3 SEF with holes toward the back
of the digital press.
2. Select Head to Head Duplex orientation.
3. Select Rear staple position.
4. Select HCSS Stack Tray as the output destination.
Note: Dual staple not available.
Simplex SEF @ 45 ppm
1. Load any Tray with SEF plain paper.
2. Select
Front staple position.
3. Select HCSS Stack Tray as the output
destination.
Duplex SEF @ 22.5 ppm
1. Load any Tray with SEF plain paper.
2. Select
Head to Head orientation.
3. Select Front staple position.
4. Select HCSS Stack Tray as the output
destination.
Simplex SEF @ 45 ppm
1. Load Trays 1, 2, or 3 SEF with 3 hole paper ( holes
toward the front of the press .)
2. Select Front staple position.
3. Select HCSS Stack Tray as the output destination.
Duplex SEF @ 22.5 ppm
1. Load Trays 1, 2, or 3 SEF with holes toward the front
of the digital press.
2. Select Head to Head Duplex orientation.
3. Select Front staple position.
4. Select HCSS Stack Tray as the output destination.
Simplex SEF @ 45 ppm
1. Load any Tray with SEF plain paper.
2. Select
Front staple position.
3. Select HCSS Stack Tray as the output
destination.
Duplex SEF @ 22.5 ppm
1. Load any Tray with SEF plain paper.
2. Select
Front staple position.
3. Select Head to Head orientation.
4. Select HCSS Stack Tray as the output
destination.
Simplex LEF @ 60 ppm
1. Load Trays 1, 2, or 3 LEF with 3 hole drilled paper
( holes to the left in Trays 1 and 2, holes to the
right in Tray 3 .)
2. Selec t Front/Dual staple position.
3. Select HCSS Stack Tray as the output destination.
Duplex SEF @ 22.5 ppm
1. Load Trays 1, 2, or 3 SEF with holes toward the back
of the digital press.
2. Select Head to Head Duplex orientation.
3. Select Rear staple position.
Note: Dual staple not available.