Xerox ApeosPort C6550 I, Network Administrator'S Manual

Page: 91 / 132

Configuration of E-mail
89
U
s
in
g Sc
an
S
e
rv
ic
e
11
Configuration of E-mail
Preparations
Prepare the following to use the E-mail feature on the machine.
z Registering E-mail account
An E-mail account for the machine needs to be registered to a mail server.
Note • Information about mail account registration, contact your system administrator.
Installation Overview
This section describes the configuration procedure to use E-mail on the machine.
The following is the procedure to use E-mail.
z Enabling Port and Setting TCP/IP
Enable the mail send port and mail receive port, and set an IP address of the
machine.
z Configuring E-mail Environment
Set items for E-mail on the machine.
Enabling Port and Setting TCP/IP
The following describes the configuration procedure to use TCP/IP on the machine.
Enable the mail send port and mail receive port, and set an IP address of the machine.
Note • The configuration can also be performed using CentreWare Internet Services or
CentreWare Utilities.
For information how to use CentreWare Internet Services, refer to "Using CentreWare Internet
Services" (P.53).
1
Display the [System Administrator Menu] screen.
1) Press the <Log In/Out> button.
2) Enter the UserID with the numeric keypad or a keyboard displayed by pressing
[Keyboard], and select [Confirm].
Note • The default UserID is “11111”. When using the Authentication feature, a password is
required. The default password is “x-admin”.
3) Select [System Settings].
2
Enable the ports which are used for E-mail.
1) Select [System Settings].
2) Select [Network Settings].
3) Select [Port Settings].
4) Select [Send E-mail] and then select [Change Settings].
5) Select [Port Status] and select [Change Settings].
6) Select [Enabled] then select [Save].
7) Select [Exit].
8) Enable the [Port Status] in [Receive R-mail] as above.