Xerox ApeosPort C6550 I, Network Administrator'S Manual

Page: 24 / 132

2 Product Overview
22
P
rod
uc
t O
v
e
rvi
ew
2
Interface Cables
When connecting the machine directly to a computer, use either the parallel interface
or USB interface. When connecting to a network, use the Ethernet interface.
Using the USB Interface
The USB interface (optional) supports USB2.0.
This section describes the installation procedure for the USB interface.
1
Confirm that the machine is off.
2
Connect a USB interface cable to
the USB2.0 interface connector on
the rear of the machine.
3
Connect the other end of the USB
interface cable to a computer.
4
Switch on the machine.
5
Restart the computer.
For details of setting items, refer to "Installation When Using USB Port" (P.29).
Using the Ethernet Interface
The Ethernet interface supports the following 2 types.
z 100Base-TX
z 10Base-T
This section describes the installation procedure for the Ethernet interface.
1
Confirm that the machine is off.
2
Connect a network cable to the
Ethernet interface connector.
Note • Prepare a network cable
suitable for your network
connection. When changing
the network cable, consult our
customer engineers.
3
Switch on the machine.