Xerox ApeosPort C6550 I, Network Administrator'S Manual

Page: 27 / 132

Control Panel
25
P
rod
uc
t O
v
e
rvi
ew
2
Customizing of the Control Panel
You can customize the <Custom> buttons and items on the [All Services] screen.
Assigning a Feature to the Custom Buttons
By assigning a feature to the Custom buttons (<Copy>, <Custom 2>, and <Custom 3>),
you can switch to that feature without returning to the [All Services] screen.
The factory default settings for these buttons are, “Copy” for the 1st button, and none
for the 2nd and 3rd buttons. You can assign a feature to the buttons selected from the
features displayed on the [All Services] screen and [Language].
For information about how to assign a feature, refer to “Screen Defaults” in Chapter 10 of the User
Guide.
Attach the labels included in this product when you have changed the assignment. If
you have used a feature for which no label is provided, use a blank label and write down
the feature using a permanent marker and attach it to the appropriate Custom button.
Customizing the [All Services] Screen
You can customize the types of features and the location of buttons on the [All
Services] screen. The following shows the factory default settings.
For information about how to customize the screen, refer to “Screen Defaults” in Chapter 10 of the User
Guide.
Note • When the feature is not available the button will not be displayed. Also, if the feature is
unavailable due to hardware problems, the button will be grayed out.
z
Copy
z E-mail
z Scan to Mailbox
z Network Scanning
z
Scan to FTP/SMB
z Check Mailbox
z
Stored Programming
z Job Flow Sheet
z Language
z Setup Menu
z
Auto Gradation Adjustment
z Print Mode
Changing the Feature Screen
You can customize the setting screen for the following features on the [All Services]
screen.
z Copy
z
E-mail
z Scan to Mailbox
z
Network Scanning
z Scan to FTP/SMB
For information about how to change the settings, refer to “Basic Copying Tab” and “Basic Scanning
Tab” in Chapter 10 of the User Guide.