8 Special Feature Keys
76
Wide Format Copy System User Guide
FINISHER
FOLD PROGRAM
TITLE BLOCK LOCATION
OUTPUT BIN
OVERLENGTH OPTION
TAB OPTIONS
Finisher Screen
Other Finisher options that are accessed from this screen, using the
Next
key, are: Punch
Options, Margin Options, Crossfold Options, and Intelligent Title Block Option.
NOTE: If no finishing device is connected, pressing the Finisher key produces the error message
shown below.
FINISHE R
FINISHE R OPTION
IS NOT AVAILABLE
Finisher Not Available Error Message Screen
When a set is being built, the finisher options cannot be changed and pressing the
Finisher
key
is invalid. The error screen shown below is displayed. Enable the finisher and select the finisher
options either before selecting the
Sets Build
option or after the set has been built.
FINISHE R
F INIS HER OP TION CANNOT BE CHA NGED
DURING SETS B UILD OPERA TION
1. Press
the
Exit
key to return to the READY screen. The Finisher indicator lamp is
extinguished.
2. Press
the
Previous
or
Next
key to scroll through the list of options.
3. When the desired option is highlighted, press the
Enter
key to select the option. The
screen for the selected option is displayed. See Finisher menu options below and on
the next page for an illustration and description of each option. Also refer to the
Folder User Documentation for additional information on the available folding options.
4. Press the Previous or
Next
key to scroll through the choices for the selected option.
5. When the desired choice is highlighted, press the
Enter
key to confirm your
selection.
6. Repeat steps 4 and 5 if you want to change a setting for any other options.
7. Press
the
Exit
key to return to the READY screen.
