Xerox 5101 User Manual Download Page 57

Page: 57 / 176

4 Image Quality

Wide Format Copy System User Guide

SOFTWARE, RUNNING ON A NETWORK CONNECTED TERMINAL, CAN USE
THIS FILE TO DISPLAY A PREVIEW OF THE SCANNED IMAGE.

•

FILE FORMAT — DEFAULT IS TIFF. USE THE

NEXT

AND

PREVIOUS

KEYS

TO SELECT THE FORMAT FOR THE DOCUMENT TO BE SAVED AS. THE
SELECTION IS TIFF, CALS OR PDF/A.

4. Press

the

Enter

key to confirm the selection.

Type Photo

Select

Photo

when the document contains a gray scale or color image, such as a photograph.

When

Photo

is selected in the Scan Mode, the screen below will be displayed. The screen

provides additional options for the user.

SCAN OPTIONS (PHOTO)

COMPRESSION:

FORMAT:

RAW

TIFF

PREVIEW

Scan Options (Photo) Screen

The SCAN OPTIONS (PHOTO) menu allows you to perform the following functions:

•

Enable or disable PREVIEW in

Photo

mode. When PREVIEW is enabled, a small

JPEG (.JPG) file is created during the scanning process and stored on the hard disk.
The FreeFlow Accxes Client Tools software, running on a network-connected
terminal, can use this file to display a preview of the scanned image.

•

Specify the saved document compression format for

Photo

mode.

•

View the saved document file format for

Photo

mode. The format is 8 bit TIFF.

NOTE: This option will not be displayed unless the Scan-to-Net feature is enabled. To order this

feature, contact your XEROX representative.

NOTE: The Background Suppression option cannot be used with the Photo setting. If Photo is

selected, Background Suppression is automatically set to Off.

1. Enter the SCAN mode by pressing the

Mode

key, then entering the Directory Name

and pressing the

Enter

key.

2. Select

Photo

by pressing the arrow key below

Original

Type

key. The screen

shown below is displayed.

SCAN OPTIONS (PHOTO)

COMPRESSION:

FORMAT:

RAW

TIFF

PREVIEW

Scan Options (Photo) Screen

3. Press

the

Previous

Next

key to highlight the scan option you wish to change.

Summary of Contents for 5101

















































































































































































Search results

Summary of Contents for 5101

Reviews:

Brands by name

Popular brands

Xerox 5101, User Manual

Search results

Summary of Contents for 5101

Reviews:

Brands by name

Popular brands