9 Scanning to the Network (Scan Mode)
94
Wide Format Copy System User Guide
•
Selection of Margins or Justification – You can crop equal amounts from each side
edge of the document by manually specifying a scan width that is narrower than the
actual document. Refer to “Scan System Control” in the “Main Menu” section to
enable or disable manual specification of the scan width.
•
Specification of Finishing Options – Since there is no physical output, the finishing
operations are not applicable.
•
Selection
of
Reduce/Enlarge
- The electronic file is saved without alteration, so all
scanned information is preserved.
•
Selection of Image
Type.
Only
Line
,
Photo
,
Normal
, and
Color
image types are
valid for SCAN mode. Refer to the “Image Quality”, “Scan Mode” section in this
manual for additional information
•
Background Suppression
- This selection is automatically switched to OFF if a
color printer is connected.
Operating in SCAN mode
To scan documents for later retrieval over the network:
1. If job accounting is enabled, enter in your User ID and Account ID when prompted
and press
Enter
. If job accounting is not enabled, you will not have to enter your IDs.
2. If you want to see a preview of the scanned images when they are retrieved from the
Controller to your workstation, verify that the Scan System’s default “PREVIEW” box
is checked when selecting the
Original
,
Type.
Use the
Previous
,
Next
, and
Enter
keys to enable PREVIEW. Use the
Enter
key to confirm your choice(s). For
Normal
and
Line
modes, you will be able to select single bit preview image scaling, and with
Accxes 13.0, the system produces improved preview images for both
Normal
and
Line
modes.
3. With READY TO COPY is displayed on the Scan System Control Panel, press the
Mode
key to display READY TO SCAN.
4. Use the keypad on the Scan System Control Panel to enter in your 16 alphanumeric
character Scan Directory name.
5. To view a sample of the file before it is scanned to a file, press the
Sample
key on
the Control Panel. Use the
Next
or
Previous
key to highlight SCAN-TO-PRINTER
and press the
Enter
key. Press the
Exit
key to return to the READY screen, and then
press
Start
. A copy will be sent to the printer.
6. When the Scan System Control Panel displays READY TO SCAN, select your
desired scanning resolution using the
Next
and
Previous
keys.
NOTE: When making a color scan, be sure to select Color with the arrow key under Image
Quality on the Scan System Control Panel. The Normal and Photo lights will be on
.
7. Select
the
Image Quality
,
Original
,
and Type
by pressing the arrow button located
under
Type
. When the
Type
(
Normal, Line, Photo
, or
Color
) is selected, the
appropriate SCAN OPTION (NORMAL, LINE, PHOTO, or COLOR) is displayed. Use
the
Next
,
Previous
, and
Enter
keys to navigate to and through the available options
on the screen. Press the
Enter
key to confirm your choice(s). For additional
information refer to the “Image Quality, Scan Mode” section of this manual.
8. Insert your original document face down and centered on the feed tray of the Scan
System.
