Page 1
Novell NetWare 4.X and 5.X NDS Quick Install Card
Xerox Document Centre 460/470 ST
NOTE:
ALL Print Servers you create must have
a password. When your printer will service
queues on multiple fileservers, the Print Server
name must be the same on all fileservers and
the Print Server password must be the same on
all fileservers.
Go to the printer and...
1.
Connect your Document Centre to the net-
work with the appropriate cabling.
2.
Enter the
Tools
pathway.
a)
Press the
Access
( )
button.
b)
On the keypad enter
1111
or the
current password. Press the
Enter
button when finished. Press the
Go to
Tools
button.
c)
The Touch Screen will be used for the
remainder of the data entry.
3.
Enable the Network Protocol
a)
Press the
Connectivity and Network
Setup
button.
b)
Wait for the screen to refresh and
press the
Network Setup
button.
c)
Press the
NetWare
button.
d)
Wait for the screen to refresh and
press the
Protocol and Media
button.
e)
Press the
Enable
button. If Physical
Media buttons appear, select either
Ethernet
or
Token Ring
. Press
Save
.
4.
Set the Frame Type
a)
Press the
Frame Type
button.
b)
Select the frame type desired then
press
Save
to retain your changes and
exit to the NetWare Options screen.
5.
Set the NDS Settings
a)
Press the
NDS Settings
button.
Novell suggests using typeful names
when entering Name Context and
Directory Service Tree information.
TYPEFUL NAME EXAMPLE:
cn=contextname.ou=organization.o=company.c=country
b)
At this screen press the
Name
Context
button and use the touch
panel keyboard to enter the context in
which this printer resides. To access
numeric characters and punctuation,
press the
More Characters
button.
When finished press
Save
.
Before You Start
To enable 100BaseT or a Token Ring interface,
refer to the
100BaseT Ethernet and Token
Ring Interface Quick Install Card
to configure
the Speed and Source Routing settings for your
environment. Then return to this card.
NOTE: If you wish to connect your Document
Centre using NDPS, you may download the
Xerox Agent and printer drivers from
www.xerox.com.
The CentreWare software supplied with your
printer can be used to set up your printer on your
Novell network. Refer to the document entitled
Network Services Guide.
This procedure
assumes you ran NWADMIN or PCONSOLE to
set up a print server object. Please refer to the
documentation supplied by Novell to complete
this task. Record precisely (Observe upper and
lower case, dot notation etc.) the following:
NDS Tree _____________________________
NDS Context Name ______________________
Print Server Name _______________________
Print Server password ____________________
Additionally, you must set
NCP Packet Signa-
ture
option to
0
,
1
, or
2
(3 is not supported), AND
set
Reply to get nearest server
to
ON
for at
least one file server that is on the same seg-
ment as the printer.
