Xerox 460 Reference Manual Download Page 126

Page: 126 / 352

Page 6 - 18

Xerox Document Centre Reference Guide

Template Pool Setup

The Template Pool is the location on the server where templates
created using the CentreWare™ Scanning Services Template utility
are stored.

If you are using the TCP/IP filing protocol, you will be able to enter
the Login, Server and Path location.

If you are using the NetWare Filing protocol, you will be able to
enter the Login, Server and Volume, Path and NDS settings (if
applicable).

Polling Setup

This setting sets the time interval for the Document Centre to Poll
the Template Pool for new templates.

Summary of Contents for 460

































































































































































































































































































































































Search results

Summary of Contents for 460

Reviews:

Related manuals for 460

Brands by name

Popular brands

Xerox 460, Reference Manual

Search results

Summary of Contents for 460

Reviews:

Related manuals for 460

Brands by name

Popular brands