Xerox 4235, Installation Planning Manual

Page: 3 / 148

XEROX 4235 LPS INSTALLATION PLANNING GUIDE iii
Safety precautions
Radio frequency emissions
WARNING: This equipment generates, uses and can radiate
radio frequency energy. It may cause radio interference to
radio communications if not installed according to the
installation instructions.
USA The 4235 LPS complies with the limits for a Class A computing
device as documented in Subpart J, Part 15 of the FCC rules
which are designed to provide reasonable protection against
such interference when operated in a commercial environment.
Operation of this equipment in a residential area is likely to
cause interference. In such cases, the user is responsible for the
expense of correcting the interference.
Canada
The 4235 LPS does not exceed the class A limits for radio noise
emissions from a digital apparatus as documented in the radio
interference regulations of the Canadian Department of
Communications.
Les present appareil numerique n'emet pas de bruits
radioelectriques depassant les limites applicables aux appareils
de classe A prescitees dans le reglement sur le brouillage
radioelectrique edicte par les ministre des communications du
Canada.
Europe 50HZ, 220V–240V equipment
The 4235 LPS was tested and is certified in conformance with
the European commission directive 82/499/ECC and VDE
0871/0875, class A, which relates to radio frequency
interference.
Laser safety
WARNING: Use of controls or adjustments or performance of
procedures other than those specified herein may result in
hazardous light exposure.
The 4235 Laser Printing System (LPS) complies with appropriate
safety standards.
With specific regard to lasers, the equipment complies with
laser product performance standards set by governmental,
national, and international agencies as a Class 1 laser product.
It does not emit hazardous light as the beam is totally enclosed
during all phases of customer operation and maintenance.
When you perform various operator functions, laser danger
labels may be visible. These labels are for Xerox service
representatives and are placed on or near panels or shields
which require a tool for removal. THESE PANELS ARE NOT TO