Xerox 4235, Installation Planning Manual

Page: 99 / 148

HOST COMPUTER SYSTEM GENERATION
XEROX 4235 LPS INSTALLATION PLANNING GUIDE 7–3
Step 2. Describe the 4235 LPS as a remote terminal with the RMTnn
parameter. You must specify various parameters depending on
the device.
Mode Device Parameters
2770 RMTnn 2770,COMP,NOMRF,BUFEX,ABUFEX,
(LINE=xx,)TRANSP
2780
RMTnn
2780,NOCOMP,MRF,(LINE=xx,)TRANS
P
3780
RMTnn
3780,COMP,NOMRF,(LINE=xx,)TRANS
P
where:
nn
Is the remote number assigned to the 4235 LPS.
COMP/NOCOMP Specifies whether space (blank) compression is used.
MRF/NOMRF
Specifies whether the multiple record feature is used.
BUFEX,ABUFEX (2770 only). Specifies that both buffer expansion and additional
buffer expansion is used.
LINE=xx Specifies the line number for a leased line, as defined by a
LINEnn parameter.
TRANSP Indicates the terminal has the text transparency feature.
Remaining subparameters default to the appropriate values and
do not need to be specified.
Step 3.
Describe the 4235 LPS as a remote printer with the Rnn.PRn
parameter. The minimum specification is:
Rnn.PR1 START,OPERATOR,CLASS=A,PRWIDTH=185
where:
nn
Is the remote number, as defined in the RMTnn parameter.
START Specifies the device is to be automatically activated.
OPERATOR
Specifies operator control of forms.
CLASS A= Specifies the print output class.
PRWIDTH=185
The maximum number of printed characters per line.
Additional parameters to be considered include NOSEP,
DRAIN, and FORMS=.
where:
NOSEP
Specifies that the separator pages are not provided between
data set groups. The operator command $T Rn.PR1,S=Y can
override this parameter. Also suppresses printing of operator
messages.
DRAIN
Specifies that print output must be started by the operator
command ($S Rn.PR1).