Xerox 4235, Installation Planning Manual

Page: 56 / 148

DOCUMENT FORMATTING
5–2 XEROX 4235 LPS INSTALLATION PLANNING GUIDE
Table 5–1. XDPM document formatting options (continued)
Settings Options
(defaults appear bold) Description
Output destination High capacity stacker
Top output tray
Select the default that determines the destination of your print
job.
Page orientation Portrait
Landscape
Mixed Select the default page layout.
Portrait Landscape
Regular
Two–up Select the page format:
Regular–places a single page image on a single piece of paper.
Two–up–places two page images side–by–side on one sheet of
paper.
Font Default font file name
# 1 font file name
# 2 font file name
# 3 font file name
# 4 font file name
# 5 font file name
# 6 font file name
# 7 font file name
# 8 font file name
# 9 font file name You can assign numbers to 10 fonts. Use these font numbers to
specify specific fonts within your print jobs. The XDPM default
font is XCP14–L for 60 Hz printers and XCP12.5iso–L for 50 Hz
printers.
Margin unit value
Margin values
Inches
Millimeters
Pixels
Lines/spaces
Top
Bottom
Left
Right Default top margin: 120 pixels
Default bottom margin: 120 pixels
Default left margin: 198 pixels
Default right margin: 3102 pixels
Horizontal tabs
(fixed)
Horizontal tabs
(variable)
Inches
Millimeters
Pixels
Spaces
Enter tab values
Delete tab(s)
Select fixed or variable for your horizontal tab setting. If you
select variable, enter the desired tab values. The default
interval is 132 pixels per tab.
The 4235 LPS has one set of default tab stops for each page
size and font orientation. There are 32 tab stops.