Xerox 4235, Installation Planning Manual

Page: 103 / 148

HOST COMPUTER SYSTEM GENERATION
XEROX 4235 LPS INSTALLATION PLANNING GUIDE 7–7
Step 4. Define the line characteristics with the RJPLINE statement;
minimum specification is:
RJPLINE N=linename,A=adapter
where:
linename Is the name assigned to this line.
adapter
Is the hardware channel address of the interface for this line.
You may specify the following parameters as needed:
F=DIAL
Specifies a switched line (sign–on card must be transmitted
from the controller).
O=AUTO
Specifies that the line start automatically at initialization
(recommended).
T=remoteid
Specifies that the remote id, as defined in the RJPTE RM
statement, is on a leased line.
S speed =
Specifies the line speed (default is 2400 bps).
No further modifications are necessary to initialize a JES3
system.
Sample parameters
Leased line environment
RJPLINE N=LINE7,A=030,T=RMT13
RJPTERM N=RMT13,T=2770,PR=1,F=FXBUF,B=512,
PRW= 255 DEVICE
DTYPE=RMT1403,JNAME=RMT13PR1,XLATE=
NO,HEADER=NO
DEVICE DTYPE=RMT2540,JNAME=RMT13PU1,XLATE=NO
Switched line environment
RJPLINE N=LINE7,A=030,F=DIAL
RJPTERM N=RMT13,T=2770,PR=1,RD=1,
F=XBUF,B=512,
PRW=255 DEVICE
DTYPE=RMT1403,JNAME=RMT13PR1,
XLATE=NO,HEADER=NO
DEVICE DTYPE=RMT2540, JNAME=RMT13PU1,
XLATE=NO
Sign–on procedures
Sign–on is performed only from a 4235 LPS on a switched line.
The format is:
/*SIGNON RJPTERM name
where: