Xerox 4235, Installation Planning Manual

Page: 36 / 148

SITE PLANNING
3-2 XEROX 4235 LPS INSTALLATION PLANNING GUIDE
Environmental requirements
Make sure the following environmental conditions are met:
Temperature range
50 ° F to 90° F (10° C to 32° C).
Humidity range 15% to 85% relative humidity. Operating the 4235 LPS above
or below this range may cause paper jams and poor print
quality.
Altitude range
Sea level to 6,561.6 feet (2,000 meters).*
* If you operate equipment at an altitude up to 10,000 feet
(3000 m), the temperature must not exceed 80° F (27° C).
Space and access Find a location that meets the requirements of the stationary or
mobile floor plans (figures 3–1 and 3–2). Be sure to place the
4235 LPS in a location that allows you to open paper trays and
doors fully and provides adequate space for service.
You may find the following information useful in finding a
suitable location within your office.
•
Noise level
−
Continuous printing: 55 decibels
−
Impulse printing: 60 decibels
−
Standby: 46 decibels
•
Airflow–No airflow restriction s apply when installed
according to the floor plans provided in this guide.
•
Heat output–Less than 6000 BTUs/hour (1750 watts) of
heat output.
Space requirements
The space requirements for your 4235 LPS are detailed in the
following sections.
Dimensions and weight
The following information details the dimensions and weight of
your 4235 LPS:
Width 61.2 inches (1553.5 mm). This includes the high–capacity
stacker.
Depth 24.6 inches (626 mm).