Xerox 2135DX - Phaser Color Laser Printer, Service Manual

Page: 28 / 199

Service Guide
15
Paper tray capacity Tray 1: 550 sheets of 20 lb. paper, 250 standard transparencies,
200 premium transparencies.
Tray 2 and Tray 5: 550 sheets of paper.
Multi-sheet Bypass Feeder: single sheet to 100 sheets of standard
paper. Varying number of envelopes and other special stock. The
Multi-sheet Bypass Feeder can use media in the 20 to 203 gm2
range.
Electrical specifications
Characteristic Specification
Primary line voltages 99 to 140 VAC (115 VAC nominal)
198 to 264 VAC (220 VAC nominal)
Primary voltage frequency
range 50 (48 to 52) or 60 (58 to 62) Hz
Power consumption 150 Watts during standby state, (1300 Watts max)
1400 Watts during warm-up
550 Watts operation average reference value
42 Watts during Energy Star state
Primary voltage fusing 110 VAC configuration – 20 Amp
220 VAC configuration – 15 Amp
Secondary DC voltages Low Voltage Power Supply High Voltage Power Supply
+3.3 VDC (CH) -900 to -1.4 kV
+ 5 V (DB) -10 to 400/+300 V
+12 V (SB) -100 to -700 V
+ 32 V (TB) +1k to +7 kV
+3.8 V (FIX) 0 to 7 kV
RF emissions Both 110 and 220 VAC-configured instruments pass these
standards: FCC Part 15 Class B
VDE Class B
EN60555-2 Class A
VCCI (CISPR 22:1997) Class B
Environmental specifications
Characteristic Specification
Temperature
Operating
Non-operating
Storage
10
o
to 32
o
C (50
o
to 90
o
F)
0
o
to 32
o
C (32
o
to 90
o
F)
-10
o
to 43
o
C (-14 to 109
o
F) (with supplies)
Media should be acclimated 24 hours before using in the printer.
Humidity
Operating
Non-operating
10 to 80% relative humidity, non-condensing
10 to 90% relative humidity, non-condensing
Media should be acclimated 24 hours before using in the printer.
Functional specifications
Characteristic Specification