Xerox 2135DX - Phaser Color Laser Printer, Service Manual

Page: 157 / 199

144
Phaser 2135 Color Printer
Xerographic components
Shutter plate
Warning Switch off the power and disconnect the power cord.
1. Open the top cover. Remove the drum/toner cartridges. Place them in
a lightproof black bag to protect the drum units from light and store in a
safe place.
2. Remove the transfer belt unit as explained on page 124.
3. Through the opening in the shutter plate, carefully remove the shutter
spring.
4.
Open the shutter plate to the full open position.
5. Carefully lift the tabs on the front edge of the shutter plate over the
stopper and continue to move it toward the front.
6.
Remove the shutter plate.
Reverse these steps to install the shutter plate; ensure all guide pins on the shutter
plate are properly aligned when reinstalling. Move the shutter plate to the full
closed position to insert the shutter spring.
Removing the shutter plate
Shutter Spring
Tabs
0725-49