Xeda International CEDAX ELECTROFOG EWV8, Instruction Manual

Page: 54 / 84

EWV
- 52 -
MAINTENANCE ELECTROFOG
7.3 PERIODIC MAINTENANCE
INTERVENTIONS
IMPORTANT
Before the start of the processing season of
products stored in the cold room, the machine
must be overhauled by a company agreed with
Cedax.
The list of approved companies is indicated in
Annex 2.
7.3.a Thermostat threshold adjustment
The thermostats have been preset at the manufacturing
site, but it may be necessary to modify the relative
parameters, through the following procedure:
• Press button P ; thermostat will display SP1 . This
value is the maximum temperature threshold. Use
the arrow keys to change this value. When the
required value is reached, press P to confirm. The
device will now display SP2 . This value indicates
the minimum threshold.
• Set the threshold using the arrows and press P to
confirm. The thermostat will return to display the
temperature.
Manufacturing parameters:
• Heating element thermostat: SP1 = 650 SP2 = 450
• Product thermostat: SP1 = 250 SP2 = 160
7.4 PERIODIC CONTROL AND
REPLACEMENT INTERVENTIONS
- The safety components (guards, emergency button,
etc.) MUST be replaced with ORIGINAL spare parts
to ensure the safety of the operators and maintain
the machine warranty.
- Immediately replace any faulty parts and devices
which could compromise the operator's safety.
DANGER
Deliberately operating when there is a fault in
the microswitches and/or sensors, exposes both
the operator and anyone near the machine to
serious risks of personal injury. Replace damaged
microswitches and/or sensors immediately;
do not tamper with or bypass them under any
circumstances. The Manufacturer declines all
responsibility for harm to persons or property
resulting from the aforementioned rules of
conduct.
- The use of ORIGINAL spare parts is essential for the
proper operation of the machine and the upkeep of
the warranty.
- The safety of the operator (and the validity of
the warranty) may also be compromised by the
presence of mechanical parts which have undergone
modifications, repairs or reconstructions not
approved by the Manufacturer.