Xeda International CEDAX ELECTROFOG EWV8, Instruction Manual

Page: 9 / 84

EWV
- 7 -
INTRODUCTION ELECTROFOG
0.4 PERSONNEL REQUIRED TO
CONSULT THE MANUAL
This manual is aimed at all those persons who, regardless
of their professional position in the workplace, come
into direct contact with the machine or, in any case, are
working in the surrounding area.
The layout of the manual (in sections divided by topic
and sector) allows you to brief and instruct the personnel
specifically assigned to the tasks for which they are
responsible. It is, therefore, recommended to brief the
personnel in charge and instruct them thoroughly, before
using it in relation to the machine.
Symbol Description
1st level machine operator: personnel without specific skills, able to perform only simple tasks,
i.e. operating the machine by using the controls on the relevant panel and loading and unloading
operations of the materials used during production, with the mobile guards installed and active (not
authorised to perform operations on the machine with the mobile guards open) .
2nd level machine operator: personnel able to perform the tasks of the 1st level operator and,
in addition, able to perform operations on the machine with the movable guards open in safe stop
conditions or in operating mode with hold-to-run control . He is also authorised for data management
and machine configuration.
Mechanical maintenance technician: qualified technician, able to perform the tasks of the 2nd
level operator and, in addition, able to intervene on the mechanical parts to make adjustments,
maintenance and necessary repairs . He is not authorized to intervene on electrical systems in the
presence of voltage.
Electrical maintenance technician: qualified technician, able to carry out the tasks of the 2nd
level operator and, in addition, able to perform all electrical adjustment, maintenance and repair
interventions . He is authorised to operate in the presence of voltage inside cabinets and junction
boxes.
Manufacturer’s technician: qualified technician assigned to carry out complex operations in
specific situations or, in any case, as agreed with the user.