Xeda International CEDAX ELECTROFOG EWV8, Instruction Manual

Page: 16 / 84

EWV
- 14 -
GENERAL INFORMATION ELECTROFOG
1.1.c Machine conformity
The ELECTROFOG machine (models EWV8 and
EWV10) is marketed with the declaration of conformity
with the provisions of Machinery Directive 2006/42/EC .
ATTENTION
Any modification that alters the design
characteristics of the machine from the point of
view of configuration, safety and risk prevention,
must be agreed in advance with the Manufacturer,
who will certify compliance with current safety
regulations and, if necessary, issue a new
certification. Any modifications or maintenance
operations, therefore, not covered by this manual
are to be considered arbitrary.
The Manufacturer declines all responsibility for
non-compliance with this safety requirement.
1.1.d Directives and standards applied
• DIRECTIVE 2006/42/EC of the EUROPEAN
PARLIAMENT AND OF THE COUNCIL of 17 May
2006 on machinery.
• UNI EN ISO 12100:2010 Safety of machinery -
General principles of design - Risk assessment and
risk reduction.
• IEC EN 60204 (2006) + A1 (2010) Safety of
machinery - Electrical equipment of machines - Part
1: General requirements.
• Directive 2014/30/EU, Electromagnetic Compatibility
(EMC).
1.1.e Other identification plates
The plates of all the main components (mechanical and
electrical) not manufactured by Cedax are located on
the relevant components, at the points where they were
placed by the respective manufacturers.
1.2 TECHNICAL SUPPORT
Our support service is at your complete disposal to
resolve any problems that may arise, or provide all the
information that may be necessary.
For any clarifications, please contact:
CUSTOMER SUPPORT SERVICE
CEDAX S.r.l.
Via F. Guarini, 15
I - 47121 Forlì
(FC) ITALY
Tel. (+39) 0543.780600
Fax. (+39) 0543.473018
http://www.cedax.it
email: info@cedax.org
We can only guarantee the best performance of our
machines with the use of original spare parts.
We, therefore, recommend that you scrupulously follow
the instructions provided in the MAINTENANCE AND
REPAIR chapter and only use spare parts with warranty.
ATTENTION
If the maintenance of the machines produced
by Cedax is carried out in a manner that does
not comply with the instructions provided and
spare parts are used without a warranty, Cedax
will be deemed to be exempt of all responsibility
for operator safety and faulty operation of the
machine.
In addition, the conformity of the machine with the
European Directives and any form of guarantee
automatically lapses.