Xeda International CEDAX ELECTROFOG EWV8, Instruction Manual

Page: 15 / 84

EWV
- 13 -
GENERAL INFORMATION ELECTROFOG
1. GENERAL INFORMATION
1.1 MANUFACTURER AND MACHINE
IDENTIFICATION
1.1.a Manufacturer
CEDAX S.r.l.
Via F. Guarini, 15
I - 47121 Forlì
(FC) ITALY
Tel. (+39) 0543.780600
Fax. (+39) 0543.473018
http://www.cedax.it
email: info@cedax.org
1.1.b Machine
Every machine is identified by a plate on which the
machine reference data are indelibly indicated.
Volt Hz Kw Kg
The identification plate shown is applied directly to the
machine; it contains the following data:
1. Manufacturer identification data
2. Year of manufacture
3. Serial number
4. Machine model
5. Machine description
6. Electrical power supply characteristics (V-Hz)
7. Electrical power (kW)
8. Weight (kg)
IMPORTANT
Always specify the description acronym, model
and serial number (S/N) when requesting
information and technical assistance.
IMPORTANT
All the data on the identification plate must always
be kept legible.
If the plate deteriorates with use and is no longer
legible, even partly, you should request another
one from the manufacturer, communicating the
data contained in these instructions or on the
original plate.
IMPORTANT
Never remove the identification plate from the
original position established by the machine
manufacturer.
Do not modify or falsify the technical data
indicated. Do not clean the plate with blunt objects
(e.g. metal brushes), to avoid damaging the above-
mentioned the data.