Xeda International CEDAX ELECTROFOG EWV8, Instruction Manual

Page: 30 / 84

EWV
- 28 -
SAFETY ELECTROFOG
3.4 RULES FOR OPERATION AND USE
- In addition to being properly documented on the use
of the machine, the operator must possess the skills
and expertise suited to the type of work activity to be
carried out.
- Even after being properly documented, at first use,
if necessary, simulate a series of test manoeuvres
to identify the controls, in particular those related to
starting and stopping, and their main functions.
- The operator must be able to ensure that there are
no personnel in the machine work areas from all
control positions.
- Use the machine only for the uses intended by
the manufacturer. Using the machine for different
purposes is considered improper use and is,
therefore, prohibited because it can pose risks to the
safety and health of persons and cause economic
damage.
- The machine has been designed and manufactured
to meet all the operating conditions indicated by the
Manufacturer. Tampering with any device in order to
obtain performances other than that envisaged may
pose risks to the safety and health of persons and
cause economic damage.
- Do not use the machine with safety devices that are
not correctly installed and working efficiently. Failure
to comply with this requirement may pose serious
risks to the safety and health of persons.
- Do not carry out any maintenance and adjustment
work when the machine is operating in the automatic
cycle. The only operations authorised are those
of stopping, switching off and adjusting the work
parameters from the control panel.
- To remove parts of the product or foreign bodies,
stop the machine in safe conditions; to do this,
turn the main switch to 0 (zero) OFF, lock it with a
padlock and make sure that all the moving parts of
the machine have stopped.
- Keep the work area clear of processing residue.
- Do not climb or get onto the machine.
- Do not place hands or anything else near or inside
moving parts.
- Do not insert hands or anything else into live parts of
the machine or into the control panel.
- Do not use the machine if the fixed protective guards
(housing and/or grilles) have been removed.
- After the production cycle has finished, turn the main
switch to 0 (zero) OFF and lock it with a padlock.
3.4.a Risks for exposed persons
If used in the safety configuration indicated by the
Manufacturer, the machine does not present risks for
exposed persons.
During maintenance, it is strictly forbidden to allow
anyone to come near the machine, the entire outer
perimeter area of the machine, should be cordoned
off and, if necessary, signs indicating “MACHINE
MAINTENANCE IN PROGRESS” should be displayed.
DANGER
The operator who performs maintenance
operations on the machine must turn the electrical
disconnector to “OFF” and padlock it. You must
remove the keys from the padlock and carry them
with you for the duration of the maintenance
operation to prevent a second operator from
inadvertently starting the machine.
DANGER
Before carrying out checks/maintenance on the
machine, wait until it has completely cooled down.