09.2020
Seite 78 / 197
Other electrical devices inside the cabin
4.9.14.1
Joystick (the pilot shut-off switch) shut-off switch
4.9.14.2
Device mounting panel assembly
Warning!
– When replacing a fuse, make sure to use one that has the same electric
current magnitude.
– Otherwise, a fire accident may ignite in the wiring or other circuit elements
due to overheat
– Only use the manufacturer’s original spare parts
The safety leve which mounted on the left control console can close or
open the pilot oil circuit of the excavator.
– When the safety lever is on the locking position, the lever shuts off
the joystick’s functions and makes it unusable.The whole equipment
cannot be operated under this condition.
Electrical mounting plate assembly is located on the front side o
f the
engine compartment.
The fuse box is equipped with a variety of fuses to prevent
overload
or short circuit of electrical equipement and devices.
The labels inside the box indicate which device each fuse
belongs to.
Note: See section 6.9.2 “Fuse Category” for more information.
The spare fuse(s) is/are located inside the fuse box’s cover.
– If an electrical component is not energized, replace the
fuse.
– If there is still no current, have the circuit
checked/repaired
