09.2020
Seite 119 / 197
Risks
when
parking
Warning!
Follow the advice to prevent risks of injury and/or property damage
Park the machine on a firm and level road surface instead of a slope. If
forced to park on a slope, fix the crawlers with seat pads, and insert
the bucket into the ground.
– Set the engine accelerator rod to “the lowest” idle speed position and
idle the engine for about 3 minutes.
– If you touch any controls inadvertently, serious accident may result.
Shut off the engine and set the safety lever to “locked” position before
leaving the cabin
Warning – Towing Operation
Warning!
Follow the advice to prevent risks of injury and/or property damage
– Do not use damaged mooring ropes or chains to minimize the risk of
accidents.
– Wear gloves when handling chains or mooring ropes.
– Use ropes or chains strong enough to bear the load.
– Tie the chains or mooring ropes on the track frame as shown in the
figure.
– Do not use the light towing holes at the back of the frame to tow the
machine or damage may result.
– Insert protective objects (e.g. wood blocks, etc.) between the ropes
and the vehicle body to protect them from damage.
– When the machine is stuck or the crawlers are trapped in slurry while
the machine still works, use a mooring rope to connect the machine to
another one to pull it out.
– As shown in the figure, connect the drag rope. To avoid the wire rope
being damaged, put some protective materials (e.g. wood blocks, etc.)
between the travel frame and the wire rope.
– Make sure that the wire rope has been connected to the main travel
frames on both machines.
– Use the other machine to the distressed one to a firm ground.
