XCMG XE17U Instruction Manual Download Page 106

Page: 106 / 208

09.2020

Seite 96 / 197

Notice

You can select between two travel speed ranges using the travel speed switch.
High and low speed switching sign on canopy, please observe carefully.

–

Press the pedal, high-speed and small-torque travel speed mode is
selected

–

Release the pedal, low-speed and large-torque travel speed mode is
selected;

Warning!

Rollover risk may cause serious ireeversible injuries or even death.

Please travel at low speed, especially when going down a slope or on
rough terrain.

Do not switch your travel mode while traveling, especially on a slope.

Switching the travel mode to high speed while driving will increase your
risk of injuries significantly..

Stop the machine and check the soil condition before changing the travel
mode.

Summary of Contents for XE17U

















































































































































































































Search results

Summary of Contents for XE17U

Reviews:

Brands by name

Popular brands

XCMG XE17U, Instruction Manual

Search results

Summary of Contents for XE17U

Reviews:

Brands by name

Popular brands