manualshive.com logo in svg

XCMG XE17U, Instruction Manual

Share
Download
XCMG XE17U Instruction Manual Download Page 56

 

 

09.2020 

Seite 46 / 197

 

 Warning! 

Safety rules for object lifting 

 

When lifting objects: 
 

  Do not lift objects on slopes, soft ground or other places where 

the machine may become unstable. 

 

  Make sure the used wire ropes meet the required standards. 

 

  Keep focused at any time during lifting jobs. Stop the process 

instantly if you feel the machine is about to tip over. 

 

  To avoid collisions, watch out your surroundings carefully 

before rotating or turning the machine while lifting objects. 

 

  To avoid object oscillation, never make sudden movements 

with the machine. 

 

  Do not lift objects from the side or towards the machine.  

 

  Never leave the seat/machine while objects are lifted. Always 

put them back on the ground first. 

 

  Lifting objects is not part of intended use for this machine. Do it 

on your own responsibility 

 

 

Summary of Contents for XE17U

















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands