09.2020
Seite 97 / 197
5.4 Control
Lever
Control Stand – Cabin Overview
1 = dump the arm
2 = crowd the arm
3 = Swivel upper structure clockwise
4 = Swivel upper structure anticlockwise
5 = lower the boom
6 = raise the boom
7 = crowd the bucket
8 = dump the bucket
Caution!
– The control lever structure of this excavator complies with ISO standard. Do
not modify such parts as valves and hoses; otherwise, the standard settings
will also be modified.
– There are marks showing standard control modes of control levers and
pedals at right-hand side of the cabin seat.
– When released, the control lever will go back to neutral position, and the
relevant machine function will stop.
Working
Control
Notice
Follow the advice
– Before starting work, move the lever around slowly to
check for any stiffness in the device’s reactivity and
sensitivity.
– Do not reach out any part of your body over the window
frame.
–
Touching the control lever unintentionally while
reaching outside may cause the working device to hurt
you.
– If the window is missing or broken, replace it
immediately.
– Know the position and function of each control element
before operation.
Notice
detailed focus on the joystick’s functions:
