09.2020
Seite 126 / 197
Notice
Protection against flying debris or parts
If the fragments are filled into the eye or bounced to any other part of body, they
will cause the severe injuries to body.
– Use the safety goggles or safety glasses to avoid injuries due to flying
particles, fragments or debris of any material.
– Prevent others from entering the working place in case of hazard of flying
objects.
During the maintenance process
:
– Warn the others that any unexpected machine movement may cause severe
injuries and hang up the warning plate “No Operation” on the control joystick
before maintaining the machine.
Support machine parts in a safe manner:
– Always secure the affected machine parts safely before starting
maintenance or repairs on them.
– Always lower the equipment to the ground before maintaining and repairing
the machine.
– Do not use slag bricks, cord tires or racks to secure the machine parts that
need maintenance or repairs. Those may topple or even break under the
parts’ steady load.
– Do not work below machine parts secured with a single jack.
Keep away from rotating parts:
–
The entrapment of limbs within rotating parts causes severe injuries.
–
In case of working next to rotating parts, do not let your limbs, clothes or
hair get sucked-in by the rotation.
Avoid flying parts:
Warning!
The grease within the crawler’s tensioning device is under high
pressure. In case that you do not observe the following matters, severe injuries,
like blindness, or death may be caused:
– Do not remove any of the grease coupler or valve body.
– Keep your body and face far away from valve body since it may fly out
suddenly at any time.
Pressure hazards with the traction reducer:
Warning!
Keep away from the air bleed bolts, as they may suddenly pop out
and cause severe injuries due to sudden acceleration.
–
The gear oil is hot. Avoid contact to prevent burns or scalds.
–
After cooling the gear oil, loosen the air bleed plug gradually to release the
pressure.
Notice
Safe storage of fittings
