09.2020
Seite 14 / 197
2.4
Hazards and Risks of Injury
Before putting the machine into operation, check the following:
o
Machine indications and safety are not reporting any fault or warning
o
Driving machine work correctly
o
When loading the machine, make sure that nobody is coming under the lifted load.
During operation, observe the followings:
Wear PPE (e.g. safety helmet, seat belt, etc.)
Do not enter dangerous zones with the machine
Do not reach into areas with moving machine parts (e.g. drive train of agitator, fan, etc.)
Keep all hatches closed
Fire Risk and Explosion
Warning
No fire, naked flames or electrostatic discharges!
Danger of fire and danger of explosion due to easily flammable operating materials or gas
mixtures resulting from these.
Observe handling-specific and situation-specific safety notes.
Improper handling of the machine in dusty environments
(e.g. dust formation by unloading bulk goods)!
- Increased risk of fire.
- Increased risk of dust-explosion
- Make sure that the operator prevents dust formation through technical or organizational
measures.
- Shorten cleaning intervals and maintenance intervals.
Observe the following safety notes
:
- Keep a fire extinguisher ready
- Make sure that the fire extinguisher is filled and ready for use
- Know how to use the fire extinguisher in case of emergency.
- Do not hang any transparent knickknack on the window glass. Because they are possible to
focus the sun and cause a fire.
- Ensure that the engine is free from inflammable deposits and soiling
(oil buildup, leaves, pine needles, coal dust, waste)
- Prior to refueling or filling with hydraulic fluid, shut down the machine and
- Secure the engine/machine against unintentional restart!
- When refueling via a tank supply line, make electrical compensation to avoid electrostatic
charging between the machine and the refuel unit.
- Immediately wipe spilled fuel off the machine with a suitable cloth.
- In case that oil is spilled on the ground or floor, use the binder to collect it.
- Dispose of any used binder safely and in an environmentally friendly manner.
- After refueling, remove the fuel supply line from the machine and close the fuel tank again.
- Only commission the machine as described in this operating instruction for use.
- Do not use booster sprays containing ether-solvents to start the engine.
- Do not store or use flammable liquids in the vicinity of the machine.
- Do not use flammable cleaning agents to clean the machine.
- Do not place flammable materials such as rags or clothing near the engine/electric motor.
- Regularly check all protective covers, cables and wire brackets for completeness
and tightness.
- Ensure that loose cables or lines are firmly re-installed.
- Check all hydraulic lines regularly (at least once a year) for damage and leaks.
- Replace damaged hydraulic lines immediately.
- Do not smoke near the battery.
- Close the cover of ashtray to extinguish the match and cigarette butt
- Ensure that there are no open flames or sources of ignition
(eg electrical equipment) near the battery.
- Check regularly the electrical machine of the machine by qualified personnel.
- Watch for loose or damaged connections and cables.
- During operation, store flammable and flammable materials only in the required
quantity close to the machine.
- Do not store combustible and flammable materials in the vicinity of the machine
- Do not store any flammable materials or carry them in the machine,
only in fire-proof containers.
