09.2020
Seite 44 / 197
If the bucket/beaker is not firmly fixed to the ground, follow the steps
below to release the pressure of the accumulator to secure the
interchangeable equipment firmly into the ground:
Make sure the key switch is set on “I” (“on”) position and the meters
and gauges are in active state
Pull the safety locking lever to its free position to link the oil passage
between the accumulator and control lever.
Move the boom control lever slowly to carefully lay it down until the
interchangeable equipment touches the ground.
Slowly move the other control levers till the residual pressure of the
accumulator is released.
Turn the engine starter switch to "O” (“OFF”) position and pull the
safety lever to the locking position. Adjust the safety lever (
①
) i to
the locking positions, and shut off the engine before leaving the
machine
Prevent unauthorized people from accessing the machine by locking
the cabin door and taking the key with you or leave it at the field
office
Parking the machine:
Park the machine on firm and flat ground.
Park on a spot free of falling rocks or other hazards.
Lower the interchangeable equipment fully to the ground
Parking on a slope
Adjust the upper structure toward the slope and stuff the
interchangeable equipment into ground like on the picture.
Place pads in front of the track shoe to prevent the machine from
slipping down the hill.
LOCK
UNLOCK
Safety lever
