09.2020
Seite 184 / 197
8.2 Loading
Notice!
Loading
–
– The direction of machine is down: with front-end equipment: move the
equipment forward with it placed on front body; without front-endequipment:
travel in reverse direction as shown in above figure.
– The centerline of machine shall be on the centerline of trailer.
– Drive the machine slowly on the slope.
With front-end equipment:
– Support the plane bucket on the trailer, and the angle between bucket rod and
movable arm should be within 90º to 110º.
– Upon inclining the machine to trailer platform, support the bucket to the trailer,
move the machine slowly forward, until the whole track moves on the trailer
and contacts the platform.
– Lift the bucket slightly, retract the bucket rod and make it under the machine,
and rotate the upper structure slowly by 180º.
– Lower the bucket to sleeper.
– Stop the engine, and remove the key from key switch.
– Move the operating lever several times until the whole pressure of hydraulic
cylinder is released.
– Pull the safety locking rod to LOCK (lock).
– Close the window, skylight and door of cab, and cover the air outlet to prevent
the wind and rain from entering.
In the cold weather, be sure to heat the machine before loading/ unloading
it.
8.3 Transport
Notice!
Transport
–
Prior to the transportation - tie the chain or rope to the
frame of machine, and don’t make the chain or rope pass
through or pressed on the hydraulic pipe or hose.
–
Place the damp blocks before and behind the track to fix
the machine.
–
Fix four corners of machine and front-end equipment to
the trailer with a chain or rope.
