X16 Installation Guide
- 24 -
Issue 2
Feature Des
cription
Backlit Blue LCD Display with Power Saver Mode
Each digital telephone endpoint (speakerphone) comes equipped with a backlit
display, which can be programmed to go into power saver after it has being idle
for 60 seconds. The backlit display is immediately activated whenever an action
such as ringing, going off hook or pressing any of the fixed or preprogrammed
buttons, is taken.
Call Pick up
There are two types of call pick up, intercom and CO Line. In both cases, the
telephone that has the call picked up from must be ringing.
Intercom – When one extension calls another extension, but the called
party is not there, the calling party presses the “
*
” key to activate
ringing. If the extension user of the called party hears their extension
ringing, they may press the
*
key on any other telephone endpoint
and pick up the actively ringing call.
CO Line – Transferred Telephone Company Lines can be picked up by
another extension by press the
#
key on their telephone endpoint.
-
When the
*
key is pressed the first ringing extension will be
picked up.
-
When the
#
key is pressed the first transferred CO Line will be
picked up.
Call Timer
When making or receiving a call the backlit display shows the time that the call
has been connected in four digit format (
00:00
).
Caller ID and Call Waiting Caller ID (Type 1 & Type 2)
The telephone company offers two types of caller ID; type 1 and type 2. Type 1
caller ID presents the caller’s name, number (when available) and the date and
time of each call. Type 2 incorporates all of the features of type 1 plus it adds
call waiting, caller ID. The system will automatically begin working with caller ID
when the user subscribes for the telephone companies Caller ID service, and it
will set the system’s time and date.
Caller ID Enable/Disable
Caller ID can be enabled or disabled at each telephone endpoint (speakerphone).
When disabled, the extension will not receive or have access to Caller ID. When
Caller ID is disabled, and the button is pressed, a tone will be heard indicating
that Caller ID is not accessible.
Issue 2
-
49 -
Syst
em S
et
up
Mail System – Voice mail comes standard with
the system and only takes a few minutes to
setup.
Clear All VMGS - Select “Yes?” to clear all voice
mail messages in the system. Select “No?” or
press the left navigation key to retain the
messages.
All Ext Off – The auto Attendant will answer
when the forward timer expires – no extensions
will ring regardless of their ringing status.
All Ext On – All Extension programmed to ring
will ring. At the expiration of the forward timer,
the call will forward to the auto attendant.
AA Only – only the attendant telephone will
ring and then the call will be answered by the
auto attendant.
Attendant EXT# – This is the extension that will
ring when a caller dials “0” in the auto
attendant.
AA Answer Delay – The Auto Attendant Answer
Delay is the time between a call ringing into the
system and the Auto Attendant answering. The
timer is variable between 06~240 seconds.
AUTO MUTE
Mail System
Clear All VMSG
No?
Auto Attend Ring
=On-AA Ring Only
Attendant EXT#
=301
AA Answer Delay
=10
