X16 Installation Guide
- 48 -
Issue 2
Syst
em S
etu
p
Music Source – The system comes with an
internal music on hold source, or can be
connected to an external music on hold source
such as a CD or MP3 player.
CO MSGW – If this parameter is set to “On” and
a Network (Telephone Company) voice mail
system with Message Waiting Indication (MWI)
is being used, then the display will show what
lines have a new voice mail message. On the
second line of the display it will show:
CO MSGW: 12 4 6
– for lines 1, 2, 4 and 6.
Clear CO MSGW – This will erase (clear) all of
the Message Waiting Indication (MWI) left by
the Network (Telephone Company) voicemail
system.
Area Codes – There are a total of 6 area codes
that can be entered into the area code
parameter.
The first is the Home Area Code. This is the
area code of the physical location of the system.
When Caller ID is received, the 3 digits entered
into the “Home Area Code” will not be displayed
or redialed.
The next five “Local Area” codes are used if the
calling area requires ten (10) digit dialing. When
Caller ID matches an entry, the number will be
displayed and redialed with only 10 digits.
When Caller ID does not match an entry in
either the Home Area code or the local area
codes, the system will display and redial the
number with 11 digits.
AUTO MUTE
Music Source
=External
AUTO MUTE
CO MSGW
=Off
AUTO MUTE
Clear CO MSGW
=No?
AUTO MUTE
Area Codes
Home Area Code
Local Area C1
Local Area C2
Local Area C3
Local Area C4
Local Area C5
Issue 2
-
25 -
Feature Des
cription
CO Line Busy/Idle Status (LED)
Each Preprogrammed CO Line button has an associated dual color Light Emitting
Diode (LED), which lights when the line is in use and remains unlit when the line
is idle. When the user presses a Line button the LED will illuminate green (I-use)
on their telephone and blue (busy) on all telephones. The Line button will light
blue (busy) when a device which is connected to a telephone company line, in
front of the system, is off hook. Once off hook, only one digital telephone
endpoint may access the line by presses the busy line button, all others will
receive busy tone.
CO Line Ringing – Per Extension
Each extension may be programmed to ring when a call is received on a specific
CO Line. By default, all CO Lines ring on all extensions. This may not be ideal for
all installations, so each extension can be programmed, in phone setup, each line
to ring or not ring.
Conference (3-way)
An extension may conference two external parties, or one internal and one
external party, together so that they may all converse. (Privacy Release may
affect this operation). A conference call cannot be recorded. The system can
have two, 3-way calls simultaneously.
To create a conference:
1)
Put the first call, must be a CO Line, on Hold
2)
Make the second intercom call or CO Line call. After the third party
answers the call, press the “Conf” button.
3)
The three parties will be joined together in a conference.
AUTO MUTE
Conf#1+3 00:00
99135992583
